Tuesday, December 29, 2009

Revised Look

Here's Nickie with the new look. I really hope this would be the last time I do anything to the exterior. Well, I nearly ordered the NTC body kit because it was on sale. It would have set me back by at least 2k including shipping from the U.K. That's alot of money for a body kit for a car that is already quite handsome in stock form. I think a nice looking car is important but I don't want to spend money excessively to spruce up the exterior. Besides, beauty is in the eyes of the beholder.










I did mentioned that the car is as red as it can be except for the side skirts. One more thing that I did not mentioned earlier but if you had a keen eye, you would have noticed it. I've added spacers that was previously used on the OZ Superlegerra to the G07. I am not sure about the dimensions but the spacer on the front wheels are thicker than the rear wheels. I would estimate that the front spacer is about 5mm and 3mm on the rear. It does help to push out the wheel slightly but still leaving enough space such that there is no rubbing. Since the spacers are so thin and made-to-measure, integrity is not affected at all. On the subject of wheels, I have been hunting around for a used set of 18" but so far, no luck. No hurry though and unless the measurements are correct, its best to be patient.

One more small change that made a huge difference was the replacement of the black wheel nuts to the original chrome wheel nuts. Its somewhat puzzling that something like a silver wheel nut can actually make the wheel look so much better, in my opinion. Whoever said that the little things in life counts obviously knew what he was talking about. So, before you jump into anything big, its best to start with the little things first. Its definitely cheaper and less stressful.

Wednesday, December 16, 2009

Lightened and Underdrive Crank Pulley

Here is another enhancement that I am considering. Someone in the forum did his research and came up with a working model of the lightened crank pulley. Crank pulleys are not new in the market. Daisy had them long ago to underdrive the water pump and power steering. She even had a lightened crank pulley but I decided to take it off because the lightened crank pulley was not dynamically balanced unlike the stock crank pulley. I did not want the risk of wrecking the engine for a meagre increase in power(?). Daisy did run better with the underdrive pulleys and till today, they have not given any problems whatsoever.

Several Japanese tuners have also been selling underdrive pulleys either for the crank, water pump and even alternator. They are relatively inexpensive to purchase but more than the price, they must be doing something useful. I was never convinced until I saw the results of what a lightened underdrive pulley can add to the efficiency and power output of the Swift engine. Here's a quote from the guy who made the pulley.

"I know there are many schools of thoughts about lightweight crank pulleys. Based solely on physics, number one there isn't lose of torque at the wheels, number two there will not be any harmful resonance (the stock crank pulley isn't dynamically balanced to tackle resonance anyway). Instead you get better throttle response and on a track you get better rev matching while up shifting, much like installing a lightened flywheel."

It all sounds good but unlike others who only talks, this guy went all the way and custom-made a crank pulley to prove his logic. He took another step forward by conducting a dyno test to make sure it really works and this is the result.


"The black curve you see is my Swift Sport in stock form. 110ps at the wheel amounts to about 126.5ps at the crank, very close to the 125ps stock on paper.

The red curve is with the underdrive crank pulley. 114ps at the wheel is about 131.1ps at the crank. All in all a gain of about 4.6ps. I was more for the torque gains and was pleased to see the jump in the torque curve."

Would you not buy this product when so much painstaking work has been done to prove that it works? I would buy it in an instant. There is only one problem. It will take him about 4 to 6 weeks to make one for me because the machine used to produce the pulley is being used for something else. The cost of the pulley is $400. For a proven gain of 4.6ps, this is a fantastic product. With some extrapolation, I figured the increase will be much more once it is installed on Nickie. I would very much want one as soon as possible so that it can be installed together with the Greddy camshafts and Remus exhaust. Thereafter, one more round of ECU tuning to maximise the enhanced components and Nickie is ready for another long run up north. Here are some pictures of the crank pulley.



Stock Crank Pulley


Lightened & Underdrive Pulley


Comparison between stock and enhanced puley


Final Product Anodised in Red

The question that begs to be answered is this; when will this enhancement exercise end? It seems that there is always something new to pop into the car. Its a difficult question to answer but I am consciously aware that each enhanced part has proven its worth individually. As a complete package, Nickie no longer drives like before. The car has grown up considerably. It would be unfair to stop unless it is proven that any change or addition of parts will not increase the efficiency and is no longer economically viable. In short, when it does not make sense to do more, the enhancement exercise will stop.
Related Posts Plugin for WordPress, Blogger...